解决 supervisor中stop django进程不能真正的停止 问题

大家好，欢迎来到IT知识分享网。

用supervisor重启djangotest 发现用ps aux有两个进程

使用stop发现只会停止父进程

用ps aux查看 发现停止的是6902的父进程还有一个子进程，
所以stop之后再start djangotest会报错

所以还要再用sudo kill -15 6904杀死 子进程6904 才能start成功

原因： django，父进程会派生出子进程，停止服务发现supervisor只停止了父进程

问题解决：

避免 Supervisord 产生孤儿进程
使用 Supervisord start 的进程如果开启多进程，产生了一些子进程，当 stop 父进程的时候，父进程有可能比子进程更早地退出，就会导致子进程成为孤儿进程，脱离 Supervisord 管理。

在 [program:x] 段配置 stopasgroup 选项和 killasgroup 选项可以避免这一情况。或者在/etc/supervisor/conf.d/XXXXX.conf 相应的配置文件下 配置

 stopasgroup=false     ;默认为false,进程被杀死时，是否向这个进程组发送stop信号，包括子进程
killasgroup=false     ;默认为false，向进程组发送kill信号，包括子进程

1start djangotest 可以用ps aux发现有两个进程

2stop djangotest后用ps aux中发现进程消失

3再次start djangotest 成功不会报错

以下不那么重要

supervisor配置文件详解 ：

[unix_http_server]
file=/tmp/supervisor.sock   ;UNIX socket 文件，supervisorctl 会使用
;chmod=0700                 ;socket文件的mode，默认是0700
;chown=nobody:nogroup       ;socket文件的owner，格式：uid:gid
 
;[inet_http_server]         ;HTTP服务器，提供web管理界面
;port=127.0.0.1:9001        ;Web管理后台运行的IP和端口，如果开放到公网，需要注意安全性
;username=user              ;登录管理后台的用户名
;password=123               ;登录管理后台的密码
 
[supervisord]
logfile=/tmp/supervisord.log ;日志文件，默认是 $CWD/supervisord.log
logfile_maxbytes=50MB        ;日志文件大小，超出会rotate，默认 50MB，如果设成0，表示不限制大小
logfile_backups=10           ;日志文件保留备份数量默认10，设为0表示不备份
loglevel=info                ;日志级别，默认info，其它: debug,warn,trace
pidfile=/tmp/supervisord.pid ;pid 文件
nodaemon=false               ;是否在前台启动，默认是false，即以 daemon 的方式启动
minfds=1024                  ;可以打开的文件描述符的最小值，默认 1024
minprocs=200                 ;可以打开的进程数的最小值，默认 200
 
[supervisorctl]
serverurl=unix:///tmp/supervisor.sock ;通过UNIX socket连接supervisord，路径与unix_http_server部分的file一致
;serverurl=http://127.0.0.1:9001 ; 通过HTTP的方式连接supervisord
 
; [program:xx]是被管理的进程配置参数，xx是进程的名称
[program:xx]
command=/opt/apache-tomcat-8.0.35/bin/catalina.sh run  ; 程序启动命令
autostart=true       ; 在supervisord启动的时候也自动启动
startsecs=10         ; 启动10秒后没有异常退出，就表示进程正常启动了，默认为1秒
autorestart=true     ; 程序退出后自动重启,可选值：[unexpected,true,false]，默认为unexpected，表示进程意外杀死后才重启
startretries=3       ; 启动失败自动重试次数，默认是3
user=tomcat          ; 用哪个用户启动进程，默认是root
priority=999         ; 进程启动优先级，默认999，值小的优先启动
redirect_stderr=true ; 把stderr重定向到stdout，默认false
stdout_logfile_maxbytes=20MB  ; stdout 日志文件大小，默认50MB
stdout_logfile_backups = 20   ; stdout 日志文件备份数，默认是10
; stdout 日志文件，需要注意当指定目录不存在时无法正常启动，所以需要手动创建目录（supervisord 会自动创建日志文件）
stdout_logfile=/opt/apache-tomcat-8.0.35/logs/catalina.out
stopasgroup=false     ;默认为false,进程被杀死时，是否向这个进程组发送stop信号，包括子进程
killasgroup=false     ;默认为false，向进程组发送kill信号，包括子进程
 
;包含其它配置文件
[include]
files = relative/directory/*.ini    ;可以指定一个或多个以.ini结束的配置文件

其中

 stopasgroup=false     ;默认为false,进程被杀死时，是否向这个进程组发送stop信号，包括子进程
killasgroup=false     ;默认为false，向进程组发送kill信号，包括子进程

完整的supervisord.conf配置文件

supervisord.conf （只改后面的include就可以了）

登录后复制
; Sample supervisor config file.
;
; For more information on the config file, please see:
; http://supervisord.org/configuration.html
;
; Notes:
;  - Shell expansion ("~" or "$HOME") is not supported.  Environment
;    variables can be expanded using this syntax: "%(ENV_HOME)s".
;  - Comments must have a leading space: "a=b ;comment" not "a=b;comment".

[unix_http_server]
file=/tmp/supervisor.sock   ; (the path to the socket file)
;chmod=0700                 ; socket file mode (default 0700)
;chown=nobody:nogroup       ; socket file uid:gid owner
;username=user              ; (default is no username (open server))
;password=123               ; (default is no password (open server))

;[inet_http_server]         ; inet (TCP) server disabled by default
;port=127.0.0.1:9001        ; (ip_address:port specifier, *:port for all iface)
;username=user              ; (default is no username (open server))
;password=123               ; (default is no password (open server))

[supervisord]
logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB        ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10           ; (num of main logfile rotation backups;default 10)
loglevel=info                ; (log level;default info; others: debug,warn,trace)
pidfile=/tmp/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false               ; (start in foreground if true;default false)
minfds=1024                  ; (min. avail startup file descriptors;default 1024)
minprocs=200                 ; (min. avail process descriptors;default 200)
;umask=022                   ; (process file creation umask;default 022)
;user=chrism                 ; (default is current user, required if root)
;identifier=supervisor       ; (supervisord identifier, default is 'supervisor')
;directory=/tmp              ; (default is not to cd during start)
;nocleanup=true              ; (don't clean up tempfiles at start;default false)
;childlogdir=/tmp            ; ('AUTO' child log dir, default $TEMP)
;environment=KEY="value"     ; (key value pairs to add to environment)
;strip_ansi=false            ; (strip ansi escape codes in logs; def. false)

; the below section must remain in the config file for RPC
; (supervisorctl/web interface) to work, additional interfaces may be
; added by defining them in separate rpcinterface: sections
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface

[supervisorctl]
serverurl=unix:///tmp/supervisor.sock ; use a unix:// URL  for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris              ; should be same as http_username if set
;password=123                ; should be same as http_password if set
;prompt=mysupervisor         ; cmd line prompt (default "supervisor")
;history_file=~/.sc_history  ; use readline history if available

; The below sample program section shows all possible program subsection values,
; create one or more 'real' program: sections to be able to control them under
; supervisor.

;[program:theprogramname]
;command=/bin/cat              ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1                    ; number of processes copies to start (def 1)
;directory=/tmp                ; directory to cwd to before exec (def no cwd)
;umask=022                     ; umask for process (default None)
;priority=999                  ; the relative start priority (default 999)
;autostart=true                ; start at supervisord start (default: true)
;startsecs=1                   ; # of secs prog must stay up to be running (def. 1)
;startretries=3                ; max # of serial start failures when starting (default 3)
;autorestart=unexpected        ; when to restart if exited after running (def: unexpected)
;exitcodes=0,2                 ; 'expected' exit codes used with autorestart (default 0,2)
;stopsignal=QUIT               ; signal used to kill process (default TERM)
;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false             ; send stop signal to the UNIX process group (default false)
;killasgroup=false             ; SIGKILL the UNIX process group (def false)
;user=chrism                   ; setuid to this UNIX account to run the program
;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
;stdout_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0)
;stdout_events_enabled=false   ; emit events on stdout writes (default false)
;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10     ; # of stderr logfile backups (default 10)
;stderr_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0)
;stderr_events_enabled=false   ; emit events on stderr writes (default false)
;environment=A="1",B="2"       ; process environment additions (def no adds)
;serverurl=AUTO                ; override serverurl computation (childutils)

; The below sample eventlistener section shows all possible
; eventlistener subsection values, create one or more 'real'
; eventlistener: sections to be able to handle event notifications
; sent by supervisor.

;[eventlistener:theeventlistenername]
;command=/bin/eventlistener    ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1                    ; number of processes copies to start (def 1)
;events=EVENT                  ; event notif. types to subscribe to (req'd)
;buffer_size=10                ; event buffer queue size (default 10)
;directory=/tmp                ; directory to cwd to before exec (def no cwd)
;umask=022                     ; umask for process (default None)
;priority=-1                   ; the relative start priority (default -1)
;autostart=true                ; start at supervisord start (default: true)
;startsecs=1                   ; # of secs prog must stay up to be running (def. 1)
;startretries=3                ; max # of serial start failures when starting (default 3)
;autorestart=unexpected        ; autorestart if exited after running (def: unexpected)
;exitcodes=0,2                 ; 'expected' exit codes used with autorestart (default 0,2)
;stopsignal=QUIT               ; signal used to kill process (default TERM)
;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false             ; send stop signal to the UNIX process group (default false)
;killasgroup=false             ; SIGKILL the UNIX process group (def false)
;user=chrism                   ; setuid to this UNIX account to run the program
;redirect_stderr=false         ; redirect_stderr=true is not allowed for eventlisteners
;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
;stdout_events_enabled=false   ; emit events on stdout writes (default false)
;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10     ; # of stderr logfile backups (default 10)
;stderr_events_enabled=false   ; emit events on stderr writes (default false)
;environment=A="1",B="2"       ; process environment additions
;serverurl=AUTO                ; override serverurl computation (childutils)

; The below sample group section shows all possible group values,
; create one or more 'real' group: sections to create "heterogeneous"
; process groups.

;[group:thegroupname]
;programs=progname1,progname2  ; each refers to 'x' in [program:x] definitions
;priority=999                  ; the relative start priority (default 999)

; The [include] section can just contain the "files" setting.  This
; setting can list multiple files (separated by whitespace or
; newlines).  It can also contain wildcards.  The filenames are
; interpreted as relative to this file.  Included files *cannot*
; include files themselves.

[include]
files = /etc/supervisord.d/*.conf