MegaCli命令使用详解_IT分享知识网

大家好，欢迎来到IT知识分享网。

一、MegaCli命令介绍

MegaCli是一款管理维护硬件RAID软件，可以用来查看raid信息等
MegaCli 的Media Error Count: 0 Other Error Count: 0
Medai Error Count 表示磁盘可能错误，可能是磁盘有坏道，这个值不为0值得注意，数值越大，危险系数越高，
Other Error Count 表示磁盘可能存在松动，可能需要重新再插入。MegaCli 可以对阵列中所有的磁盘进行检测

二、安装过程

1、系统环境

dmidecode -t1 | egrep “Manufacturer|Product Name”
cat /etc/redhat-release
查看厂商和产品型号，以及”Serial Number”

2、下载和安装

rpm -qa | egrep ‘Lib_Utils|MegaCli’ //检查是否安装

https://raw.githubusercontent.com/crazy-zhangcong/tools/master/MegaCli8.07.10.tar.gz

或下载地址：https://pan.baidu.com/s/1TAGHjTA19ZR8MGODaqy7Mg 提取密码：msbq

2.1 进行解压安装操作

[root@localhost ~]# wget https://raw.githubusercontent.com/crazy-zhangcong/tools/master/MegaCli8.07.10.tar.gz
--2019-02-26 16:04:43--  https://raw.githubusercontent.com/crazy-zhangcong/tools/master/MegaCli8.07.10.tar.gz
Resolving raw.githubusercontent.com... 151.101.128.133, 151.101.64.133, 151.101.0.133, ...
Connecting to raw.githubusercontent.com|151.101.128.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4148077 (4.0M) [application/octet-stream]
Saving to: “MegaCli8.07.10.tar.gz”

100%[=============================================================================================>] 4,148,077    520K/s   in 8.1s    

2019-02-26 16:04:52 (500 KB/s) - “MegaCli8.07.10.tar.gz” saved [4148077/4148077]

[root@localhost ~]# ls
anaconda-ks.cfg  install.log  install.log.syslog  MegaCli8.07.10.tar.gz  Python-2.7.8.tgz  test.txt
[root@localhost ~]# tar -xvf MegaCli8.07.10.tar.gz 
MegaCli8.07.10/
MegaCli8.07.10/Linux/
MegaCli8.07.10/Linux/Lib_Utils-1.00-09.noarch.rpm
MegaCli8.07.10/Linux/MegaCli-8.02.21-1.noarch.rpm
MegaCli8.07.10/Linux/readme.txt
MegaCli8.07.10/Linux/Run-Linux-PERC.sh
MegaCli8.07.10/WINDOWS/
MegaCli8.07.10/WINDOWS/MegaCli.exe
MegaCli8.07.10/WINDOWS/MegaCli64.exe
MegaCli8.07.10/WINDOWS/readme.txt
MegaCli8.07.10/WINDOWS/X64.bat
MegaCli8.07.10/WINDOWS/X86.bat
[root@localhost ~]# ls
anaconda-ks.cfg  install.log  install.log.syslog  MegaCli8.07.10  MegaCli8.07.10.tar.gz  Python-2.7.8.tgz  test.txt
[root@localhost ~]# cd MegaCli8.07.10/Linux/
[root@localhost Linux]# ls
Lib_Utils-1.00-09.noarch.rpm  MegaCli-8.02.21-1.noarch.rpm  readme.txt  Run-Linux-PERC.sh
[root@localhost Linux]#  rpm -ivh Lib_Utils-1.00-09.noarch.rpm MegaCli-8.02.21-1.noarch.rpm 
Preparing...                ########################################### [100%]
Installing....
   1:Lib_Utils              ########################################### [ 50%]
   2:MegaCli                ########################################### [100%]

说明：安装完毕之后MegaCli64所在路径为/opt/MegaRAID/MegaCli/MegaCli64，在此路径下可以运行MegaCli64工具，切换到其它路径下则不能执行，此时为了使用方便，可以考虑将/opt/MegaRAID/MegaCli/MegaCli64追加到系统PATH变量，或者像下面这样做（建议）：

[root@localhost Linux]# ln -s /opt/MegaRAID/MegaCli/MegaCli64 /bin/MegaCli64
[root@localhost Linux]# ln -s /opt/MegaRAID/MegaCli/MegaCli64 /sbin/MegaCli64

　2.2 查看硬盘数量

[root@localhost ~]# MegaCli64 -PDList -aALL | egrep 'Enclosure Device ID|Slot Number'
Enclosure Device ID: 32
Slot Number: 0
Enclosure Device ID: 32
Slot Number: 1
Enclosure Device ID: 32
Slot Number: 2
Enclosure Device ID: 32
Slot Number: 3
Enclosure Device ID: 32
Slot Number: 4
Enclosure Device ID: 32
Slot Number: 5
Enclosure Device ID: 32
Slot Number: 6
Enclosure Device ID: 32
Slot Number: 7
Enclosure Device ID: 32
Slot Number: 8
Enclosure Device ID: 32
Slot Number: 9
Enclosure Device ID: 32
Slot Number: 10
Enclosure Device ID: 32
Slot Number: 11
Enclosure Device ID: 32
Slot Number: 12
Enclosure Device ID: 32
Slot Number: 13

三、硬盘命令使用

1、常用查询命令

/opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -Lall -aALL 【查raid级别】
/opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aALL 【查raid卡信息】
/opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL 查看【硬盘信息】
/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -aAll 【查看电池信息】
/opt/MegaRAID/MegaCli/MegaCli64 -FwTermLog -Dsply -aALL 【查看raid卡日志】
/opt/MegaRAID/MegaCli/MegaCli64 -adpCount 【显示适配器个数】
/opt/MegaRAID/MegaCli/MegaCli64 -AdpGetTime –aALL 【显示适配器时间】
/opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aAll 【显示所有适配器信息】
/opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -LALL -aAll 【显示所有逻辑磁盘组信息】
/opt/MegaRAID/MegaCli/MegaCli64 -PDList -aAll 【显示所有的物理信息】
/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuStatus -aALL |grep ‘Charger Status’ 【查看充电状态】
/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuStatus -aALL【显示BBU状态信息】
/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuCapacityInfo -aALL【显示BBU容量信息】
/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuDesignInfo -aALL 【显示BBU设计参数】
/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuProperties -aALL 【显示当前BBU属性】
/opt/MegaRAID/MegaCli/MegaCli64 -cfgdsply -aALL 【显示Raid卡型号，Raid设置，Disk相关信息】

2、查看磁盘缓存策略

/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -Cache -L0 -a0【显示0 RAID卡 0 RAID组的缓存策略
/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -Cache -L1 -a0【显示1 RAID卡 0 RAID组的缓存策略】
/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -Cache -LALL -a0【显示所有RAID卡 0 RAID组的缓存策略】
/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -Cache -LALL –aALL【显示所有 RAID卡 所有 RAID组的缓存策略】
/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -DskCache -LALL -aALL

设置磁盘的缓存模式和访问方式（Change Virtual Disk Cache and Access Parameters）

Description Allows you to change the following virtual disk parameters:
-WT (Write through), WB (Write back): Selects write policy.
-NORA (No read ahead), RA (Read ahead), ADRA (Adaptive read ahead): Selects read policy.
-Cached, -Direct: Selects cache policy.
-RW, -RO, Blocked: Selects access policy.
-EnDskCache: Enables disk cache.
-DisDskCache: Disables disk cache.
MegaCli -LDSetProp { WT | WB|NORA |RA | ADRA|-Cached|Direct} |
{-RW|RO|Blocked} |
{-Name[string]} |
{-EnDskCache|DisDskCache} –Lx |
-L0,1,2|-Lall -aN|-a0,1,2|-aALL
MegaCli -LDSetProp WT -L0 -a0

3、设置磁盘缓存策略

显示磁盘缓存和访问方式（Display Virtual Disk Cache and Access Parameters）

MegaCli -LDGetProp -Cache | -Access | -Name | -DskCache -Lx|-L0,1,2|
-Lall -aN|-a0,1,2|-aALL
Displays the cache and access policies of the virtual disk(s):
-WT (Write through), WB (Write back): Selects write policy.
-NORA (No read ahead), RA (Read ahead), ADRA (Adaptive read ahead): Selects read policy.
-Cache, -Cached, Direct: Displays cache policy.
-Access, -RW, -RO, Blocked: Displays access policy.
-DskCache: Displays physical disk cache policy.
缓存策略解释：

WT (Write through)
WB (Write back)
NORA (No read ahead)
RA (Read ahead)
ADRA (Adaptive read ahead)
C (Cached)
D (Direct)
例子：
/opt/MegaRAID/MegaCli/MegaCli64 -LDSetProp WT|WB|NORA|RA|ADRA -L0 -a0
/opt/MegaRAID/MegaCli/MegaCli64 -LDSetProp -Cached|-Direct -L0 -a0
enable / disable disk cache
/opt/MegaRAID/MegaCli/MegaCli64 -LDSetProp -EnDskCache|-DisDskCache -L0 -a0

4、创建阵列

创建一个raid5阵列，由物理盘2,3,4构成，该阵列的热备盘是物理盘5
/opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd -r5 [1:2,1:3,1:4] WB Direct -Hsp[1:5] -a0
创建阵列，不指定热备
/opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd -r5 [1:2,1:3,1:4] WB Direct -a0
创建一个raid10阵列，由物理盘2,3和4,5分别做raid1，在将两组raid1做raid0
/opt/MegaRAID/MegaCli/MegaCli64 –CfgSpanAdd –r10 –Array0[1:2,1:3] –Array1[1:4,1:5] WB Direct -a0

5、删除阵列

/opt/MegaRAID/MegaCli/MegaCli64 -CfgLdDel -L1 -a0

6、在线添加磁盘

/opt/MegaRAID/MegaCli/MegaCli64 -LDRecon -Start -r5 -Add -PhysDrv[1:4] -L1 -a0

7、阵列创建完后，会有一个初始化同步块的过程，可以看看其进度。

/opt/MegaRAID/MegaCli/MegaCli64 -LDInit -ShowProg -LALL -aALL
或者以动态可视化文字界面显示
/opt/MegaRAID/MegaCli/MegaCli64 -LDInit -ProgDsply -LALL -aALL

8、查看阵列后台初始化进度

/opt/MegaRAID/MegaCli/MegaCli64 -LDBI -ShowProg -LALL -aALL
或者以动态可视化文字界面显示
/opt/MegaRAID/MegaCli/MegaCli64 -LDBI -ProgDsply -LALL -aALL

9、指定第5块盘作为全局热备

/opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Set [-EnclAffinity] [-nonRevertible] -PhysDrv[1:5] -a0

10、指定为某个阵列的专用热备

/opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Set [-Dedicated [-Array1]] [-EnclAffinity] [-nonRevertible] -PhysDrv[1:5] -a0

11、删除全局热备

/opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Rmv -PhysDrv[1:5] -a0

12、将某块物理盘下线/上线

/opt/MegaRAID/MegaCli/MegaCli64 -PDOffline -PhysDrv [1:4] -a0
/opt/MegaRAID/MegaCli/MegaCli64 -PDOnline -PhysDrv [1:4] -a0

13、查看物理磁盘重建进度

/opt/MegaRAID/MegaCli/MegaCli64 -PDRbld -ShowProg -PhysDrv [1:5] -a0
或者以动态可视化文字界面显示
/opt/MegaRAID/MegaCli/MegaCli64 -PDRbld -ProgDsply -PhysDrv [1:5] -a0

14、磁盘状态的变化，从拔盘，到插盘过程中

Device |Normal|Damage|Rebuild|Normal
Virtual Drive |Optimal|Degraded|Degraded|Optimal
Physical Drive |Online|Failed –> Unconfigured|Rebuild|Online

四、其他命令说明

1、当前raid缓存状态，raid缓存状态设置为wb的话要注意电池放电事宜，设置电池放电模式为自动学习模式

/opt/MegaRAID/MegaCli/MegaCli64 -ldgetprop -dskcache -lall -aall

2、电池设置相关

查看电池状态信息(Display BBU Status Information)

MegaCli -AdpBbuCmd -GetBbuStatus -aN|-a0,1,2|-aALL
MegaCli -AdpBbuCmd -GetBbuStatus -aALL

查看电池容量（Display BBU Capacity Information）

MegaCli -AdpBbuCmd -GetBbuCapacityInfo -aN|-a0,1,2|-aALL
MegaCli -AdpBbuCmd -GetBbuCapacityInfo –aALL

查看电池设计参数(Display BBU Design Parameters)

MegaCli -AdpBbuCmd -GetBbuDesignInfo -aN|-a0,1,2|-aALL
MegaCli -AdpBbuCmd -GetBbuDesignInfo –aALL

查看电池属性（Display Current BBU Properties）

MegaCli -AdpBbuCmd -GetBbuProperties -aN|-a0,1,2|-aALL
MegaCli -AdpBbuCmd -GetBbuProperties –aALL

设置电池为学习模式为循环模式（Start BBU Learning Cycle）

Description Starts the learning cycle on the BBU.
No parameter is needed for this option.
MegaCli -AdpBbuCmd -BbuLearn -aN|-a0,1,2|-aALL

3、通过脚本检测RAID 磁盘状态

MEGACLI="/opt/MegaRAID/MegaCli/MegaCli64 "
$MEGACLI -pdlist -aALL  | grep "Firmware state" | awk -F : '{print $2}' | awk -F , '{print $1}'
$MEGACLI -pdlist -aALL  | grep -E "Media Error|Other Error" | awk -F : '{print $2}'

4、raid图解

图1、图2

MegaCli命令详解

*** 参考博客：
https://blog.csdn.net/lufeisan/article/details/53398756

转载于:https://www.cnblogs.com/easonscx/p/10438053.html

免责声明：本站所有文章内容,图片，视频等均是来源于用户投稿和互联网及文摘转载整编而成，不代表本站观点，不承担相关法律责任。其著作权各归其原作者或其出版社所有。如发现本站有涉嫌抄袭侵权/违法违规的内容,侵犯到您的权益，请在线联系站长,一经查实,本站将立刻删除。本文来自网络,若有侵权，请联系删除，如若转载，请注明出处：https://yundeesoft.com/22737.html

MegaCli命令使用详解