大家好,欢迎来到IT知识分享网。
服务端配置转自:https://blog.csdn.net/qq_29663071/article/details/53337975(过时)
1.4.2版本参考How to Set Up Dante Proxy for Private Connections on Ubuntu 20.04 | DigitalOcean
客户端使用proxifier_3.21
1.安装dante-server
apt-get install dante-server |
2.修改配置文件:
备份原配置文件
mv /etc/danted.conf /etc/danted.conf.bak |
新建配置文件
touch /etc/danted.conf nano /etc/danted.conf |
匿名配置内容
logoutput: /var/log/danted.log internal: 你的内网IP地址 port = 1080 external: 你的内网IP地址 method: username none user.privileged: proxy user.notprivileged: nobody user.libwrap: nobody client pass { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect disconnect } pass { from: 0.0.0.0/0 to: 0.0.0.0/0 port gt 1023 command: bind log: connect disconnect } pass { from: 0.0.0.0/0 to: 0.0.0.0/0 command: connect udpassociate log: connect disconnect } block { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect error } |
3.创建log文件夹
mkdir /var/log/sockd
4.启动Dante
/etc/init.d/danted start
5.检测是否启动成功
netstat -anp | grep 1080
用户连接后查看连接情况
开启用户身份验证
sudo nano /etc/danted.conf
logoutput: /var/log/danted.log
internal: 192.168.237.25 port = 8001
external: 192.168.237.25
method: username #none
user.privileged: root
user.notprivileged: 用户名(注意前面的空格。。。。)
user.libwrap: nobody
client pass {
from: 0.0.0.0/0 to: 0.0.0.0/0
log: connect disconnect
}
pass {
from: 0.0.0.0/0 to: 0.0.0.0/0
command: bind connect udpassociate
log: error # connect disconnect iooperation
method: username
}
block {
from: 0.0.0.0/0 to: 0.0.0.0/0
log: connect error
}
可以使用useradd指令添加一个用户 如danted
然后设置密码passwd danted
免责声明:本站所有文章内容,图片,视频等均是来源于用户投稿和互联网及文摘转载整编而成,不代表本站观点,不承担相关法律责任。其著作权各归其原作者或其出版社所有。如发现本站有涉嫌抄袭侵权/违法违规的内容,侵犯到您的权益,请在线联系站长,一经查实,本站将立刻删除。 本文来自网络,若有侵权,请联系删除,如若转载,请注明出处:https://yundeesoft.com/24068.html